fbpx

Edmonton Electrician | Avoid Overloading Your Circuits

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Avoid Overloading Your Circuits

One of the most important parts of owning a home says Edmonton electrician. Is taking care of the electrical components. And, part of that is not overloading the electrical circuits.
Edmonton Electrician

Especially if people are living in homes that are a bit older. Their electrical components may be aged. And therefore, may not be working. The way someone would expect them to.

A common problem that many people have. Is that as their home gets older. There circuit breaker starts to trip. More often, even if there electrical consumption. Has not changed at all.

Rather than calling their Edmonton electrician. To come in and take a look at what is going on. Many homeowners simply live with it. Until the problem seemingly corrects itself.

While they might think the problem has been fixed. What is happening, is that as the circuit breaker. Starts to wear out, it starts to act up. And this is a sign that people should be contacting their an electrician to replace it.

Rather than simply waiting to see what happens next. However, when the problem suddenly stops. Many people think there is no cause for concern. And this is not true at all.

What has happened, is that the circuit breaker. Has simply worn out, and then completely stopped working. Leaving the home completely unprotected. Against overloaded electrical circuits.

Read More…

Typically, when a circuit is overloaded. And more than 1500 W of electricity. Or coursing through the wires. The circuit breaker will interrupt that flow of electricity. So that it does not overload the wires. Which could cause an electrical fire.

Therefore, when the circuit breaker is no longer working. Edmonton electrician says the flow of electricity. Will continue, completely uninterrupted. And that puts the house at risk.

Therefore, if a circuit breaker is starting to act up. Rather than ignoring it. Homeowners should use that opportunity. Not only to call their experts. Such as Hauer Power to come in and take a look at it.

They should also ensure that all other electrical components. Or working properly. And also have them take a look at the electrical panel. Electrical panels do not need replacing often.

But if someone is going to upgrade the electrical components in their home. It may be a good idea. To have the panel looked at. And replaced proactively. They can get a larger panel. That has more room for more circuits.

So that they can address their growing electrical needs. The sooner homeowner can address this. And fix any problems, the better. If they wait until the circuit breaker is no longer functioning.

They may not realize that they are putting their family. As well as their home at risk. As there will be no way. To stop an overloaded circuit from starting a fire within the walls of their home.

If people would like more information about overloaded circuits. Or more information on how to add more outlets to their home. Homeowners should not hesitate to contact Hauer Power today

Edmonton Electrician | Avoid Overloading Your Circuits Now

When homeowners are ready to upgrade their electrical, Edmonton electrician can help. However, they may not realize that it is time to upgrade their electrical circuits. And their home is at risk.

The reason why there home is at risk. Is because if there is no way to stop electrical circuit overload. Then they might be prone to starting on electrical fire. Each electrical outlet can handle approximately 1500 W of electricity.

And the circuit breaker is designed to stop the flow of electricity when it exceeds that. In order to avoid overloading the wires. That deliver that electricity. The reason why electricians and homebuilders.

Do not install thicker wires sooner. Is because it comes down to cost. It will cost significantly more money. To install thicker wires that can handle more electricity at a time.

Therefore, the outlets can only handle. A certain amount of electricity at a time. Will if the flow of electricity is not minimized or stopped by the circuit breaker. What will happen is the wire. In order to handle a larger flow of electricity.

Will simply get hotter, and hotter. The longer the electrical device is in use. One of two things will happen says Edmonton electrician. The outlets will either stop working. Because the wire has destroyed itself from the heat.

Read More…

Or, the wire will catch other flammable surfaces. On fire, from the heat of it. Since the wires are inside the wall, with insulation, wooden studs and drywall. There is a airy good chance. That is overloaded wire can cause a fire.

An electrical fire in home is a very dangerous thing says Edmonton electrician. Simply because it will use all of the oxygen. In between the walls. And consume all of the flammable material. Such as the studs that frame of the house.

The fire can burn very quickly. And spread very quickly. Inside the walls. So that the entire house can become engulfed. Before people even realize. That the house is on fire. If this happens at night. It can cause people to.

Barely be able to get out of the burning home. This is why lexical fires are so dangerous. And why circuit breakers exist. However, homeowners should not rely solely on their circuit breakers. Because if they do fail.

There is not a backup to help the homeowners understand. That there is an overloaded circuit in their home. Add to that the possibility. That poor wiring from a previous owner. Or age has caused the house.

To no longer be grounded or bonded correctly. And that spells a lot of danger. For the electrical system within a home. Rather than counting on the systems that are in place. Homeowners should understand.

How much electricity they can plug into one circuit at a time. And avoid exceeding that. And when that fails, that is when the circuit breaker can leap into action and work properly. If homeowners have more questions.

About the electric workings of their home. Or if they would like to upgrade their electricity. All they have to do is reach over by phone or email to Hauer Power today.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3