Edmonton Electrician | Do Not Fish Cables Yourself

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Do Not Fish Cables Yourself

Though it may be very tempting, for people to try to do their own minor electrical work themselves says Edmonton electrician. They should avoid doing this for many different reasons.

Edmonton Electrician _ Video Image

Not only will they not know the most up-to-date electrical code. If they know any electrical code at all. Which could result in the job being unsafe. Even if it is functioning at the time of it being finished.

They might cause problems, when people try to fish cables. That cause problems to the existing wiring. Because when people are fishing cable in a building, that is finished.

They are going to have to fish cables or wires in a wall. That may have other cables and wires. In addition to things like plumbing pipes, insulation or studs in unusual places.

People might end up displacing other things in the wall. Which would render them unusable. And now, instead of just having to call an Edmonton electrician to fix.

They may need to call a variety of experts, to troubleshoot what exactly they did. And how to fix it. So that they can get their home working the way they want it. This is why they should do it properly from the start.

In fact, there are many different ways to frame home. Including directional framing, and balloon framing. That would have studs being in places that people are not expecting.

Read More…

Another problem that could happen, when people are fishing their own wires and cables. Is that they make a mistake, that renders the breaker useless. So that the breaker, which is designed to turn off power.

To an overloaded circuit, will not turn the power off. Which means that building is at a much higher risk. Of having an electrical fire breakout. Which can travel very quickly throughout the entire building.

No matter how large or small a job is. It is always advantageous to hire and Edmonton electrician. Because not only will they ensure that the job is done correctly. If they are called in to fix a mistake.

They will have to charge more, in order to fix the problem, and then do it correctly. Instead of just doing it correctly in the first place. Chances are quite good, that the job will not be as expensive as they first assume.

To get it done properly by a professional from the start. As well, the professional will be able to look for things. Such as the brand of panel that people have. Because some panels are now known to be very unsafe.

And they will be able to alert homeowner to this. And recommend that they get a new panel. So that they can make their home, or office safer for themselves, and for whoever is going to be in that building.

In order to ensure things are safe, homeowners, and building owners. She always ensure that they are contacting the right professional to do the right job. Which is why they should always hire an electrician, to ensure that they run whatever wires or cables they need correctly.

Edmonton Electrician | Do Not Fish Cables Yourself

As tempting as it might seem, to do small electrical jobs themselves says Edmonton electrician. This is very ill advised, because people can end up causing larger problems. And even compromising the safety of their home.

Even seemingly simple jobs. Are going to require a lot of expertise. Even running cable for the walls. Which people might think of as something very simple. Can be extremely complex.

From studs being in spots. Where people are not expecting them to be. As well as other wires, cables. And even pipes being in the way. They might even run into perpendicular studs.

That are designed to be a fire block. To stop, or slow down the spread of an electrical fire. When it is spreading in between the walls. And when they drill into that block, in order to run cable.

They may not realize that they have rendered that safety feature useless. And are now, at risk. When they were not before. As well, when they try to do their own electrical work.

And they make a mistake, or things do not work when they are complete. They are going to have to call an Edmonton electrician anyway. To fix their mistake, which will be more expensive in the long run.

Read More…

As well, when people are drilling into a wall. In order to run cable. If there is insulation in that wall. Using a drill in that area. Could pull some of the insulation out. Which could do several things.

A could cause a cold spot, which in the cold climate of northern Alberta. Where there is temperatures below twenty for many months. A cold spot in the wall could be a big problem.

But also, electricians say people might end up poking a hole into the vapour barrier. Which could allow moisture to get in, where it could cause mould. Which will be a much larger, more expensive problem to fix.

This is why it is very advantageous to contact professional from the beginning. Because not only will they get the job done correctly. There also going to be able to look for other things, that may need addressing.

Such as what brand of panel a person has in their home. There are certain brands that are known to be unsafe. And when people do their own electrical work themselves. They may be missing out on this important piece of information.

As well, when they do their own electrical work. They may not be doing it as safe as the new Canadian electrical code requires. Which may be putting their home at risk, unknowingly.

By calling in Edmonton electrician to quote on the job. People find out that it is less expensive to get there simple job done. And they will have the peace of mind knowing that it will get done correctly from the start. So that they and their family will not be at risk.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3