Edmonton Electrician | Hiring the Right Electrician

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Hiring the Right Electrician

When people are getting work done on their residence says Edmonton electrician. They need to ensure that they are hiring the right professional who will do all aspects of the job correctly.

The reason why, because if even the smallest detail is done incorrectly, or overlooked. They can end up putting the home itself. And the family within the home at risk of injury or worse.

And while nobody’s going to say that an electrician is going to save anyone’s lives. If they do their job properly. They could put those lives at risk. Which is why it is vital to hire the right professional.

For example, if an electrician does not do the grounding or bonding correctly. The electrical systems may be working as far as the homeowners are aware of.

And they might find that they are experiencing some flickering lights. Or that the lights in their home are dimming from time to time. However, other than being a minor nuisance.

They do not realize that this is an indication of a much more serious problem. Such as the grounding or bonding not being done properly in their wiring.

When this is the case, one of the grounding electrodes they either be faulty, due to age. Or may simply have been installed incorrectly. And as small as that might seem to be.

The home, and its occupants could be at risk by missing something that small. Which is why people need to be very careful when hiring the right Edmonton electrician.

One of the first things that they can do, is ask electrician they are thinking of hiring. What version of the Canadian electrical code they are using. This is very important, because the code gets updated yearly.

More…

Therefore, they are not using the most up-to-date code. They may be lies in unsafe practices. Were simply be doing the electrical work in a way that will not be able to pass inspection.

The next thing that homeowners can do when they are needing to hire and Edmonton electrician for their home. Is ask them what kind of permit, if any they need to pull.

The right electrician knows the answer to the question is they always need to pull a permit. Because additions or alterations to an existing system. Need to have a permit.

If an electrician says they do not need to pull any, that is a good indication. That they are not the right electrician to be working on an electrical job in a residential unit.

And finally, it is very advantageous for homeowners to ask an electrician. What systems or processes they have in place. To ensure they can do the job properly from start to finish.

Electrical jobs are extremely complex. And an electrician might be going from the very simple jobsite to a very complex one. So checklists and templates can be extremely helpful.

To ensure that an electrician is not inadvertently missing something or forgetting something. Because they were not able to commit it to memory.

By asking these questions. Homeowners can be satisfied that the electrician they hire will be the right one. To do the electrical work on their home safely, and correctly.

Edmonton Electrician | Hiring the Right Electrician

When people are needing some electrical work done in their home, they need to hire and Edmonton electrician. And hiring the right one is very important for many reasons.

While many people understand that it is important to have the electrical system done properly. They may not realize some of the risks that are associated with not having it wired correctly.

And something as small as a ground fault electrode being faulty or forgotten. Can end up causing significant risk to the home, and its occupants.

What grounding and bonding referred to says Edmonton electrician. Is anything that the electrician puts into the electrical system. That can help the overcurrent device. Whether it is a fuse or breaker operate correctly.

For example, the ground fault is what has the electrical current flow back to the source from where it originated. And so if there is an overabundance of electricity, it will flow back to the source.

And cause the breaker to trip. Most people are familiar with the breaker that trips when they plug too many things into one electrical outlets. Such as an air conditioner into the same plug-in as their stereo.

When this happens, typically people realize that an entire circuit has stopped working. Because air conditioner in the stereo stops working at the same time. And things like the lights that once on are no longer working.

More…

They realize that in order to fix this, they have to unplug one of those devices. And then go to the breaker box and reset the breaker. And the ground fault is actually what causes this system to work properly.

Therefore, if the ground fault is faulty or installed incorrectly. The breaker box will not trip. Which means the wires in an overloaded circuit will be compromised.

As the wires themselves struggle to keep up with a flow of electricity they never were designed to have flow through them. They will get hot to the touch.

And when they stay hot enough for a long enough period of time, such as a few minutes. The heat from the wires can cause the wire to burst into flames, starting an electrical fire inside the wall.

Electrical fires are so damaging. Because they can travel inside the wall of the home. And by the time people are aware that their home is on fire. It can be very difficult to evacuate from.

Also, Edmonton electrician says that grounding and bonding also can protect the home from electrical surges. And many people are familiar with a surge protector, and plug their computers into these devices.

Because they know that an electrical surge can damage electronics. But while people have surge protectors on their computer. They will not have a surge protector on every single electrical device in their house.

Such as a stereo, television, or washer and dryer. And not only can these devices be damaged during a power surge. It can also ensure a person, if they are touching an electrical device during a surge as well.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3