Edmonton Electrician | Maintaining Motion Sensors Help Them Work Longer
It is very important that people are maintaining their motion detector systems on a regular basis to ensure that they are in their best operating capacity says Edmonton electrician. They often get phone calls from homeowners and business owners who say that their system no longer works, or that the business or home that they just purchased has a system that isn’t in operation. However, rather than replacing it, calling an expert to come out and take a look at it can help determine if the motion sensor system is actually not functioning properly. Or if it just needs some routine maintenance. By understanding this, and engaging in regular maintenance can help ensure that people’s motion sensor systems are being maintained for many years of service.
One of the first things that people should take into consideration when they are looking at their motion detection system is what kind of light bulbs do they use. People can end up having to replace light bulbs far more often than they realize if they are still using incandescent light bulbs, halogen light bulbs or fluorescent light bulbs. Edmonton electrician says that fluorescent light bulbs were often considered the longest usage light bulb, but The newest light bulb on the market is actually the longest lasting by a large margin. LEDs are the newest Light Source to be incorporated into motion sensors. And they have the longest lifespan by a very large margin. Therefore, people can use LED light bulbs in their motion sensors, and has to replace the light bulbs far fewer times than any other light source that they could use. This can help ensure that the motion sensors are working longer, without having to replace light bulbs as often.
Another reason why LED light bulbs are preferred by Edmonton electrician in motion detector systems is because they are far more durable. LED stands for light emitting diode, and these diodes are encased in a plastic shell that is incredibly robust. Incandescent, halogen and fluorescent light bulbs are all encased in glass. Meaning they are more susceptible to breakage from debris being blown around, or rocks that maybe song at the light from passing vehicles. However, the biggest threat to glass light bulbs is the fact that they all emit Heat. Even fluorescent light bulbs which were known to have a very low operating temperature, still get warm when on for a few minutes. If rain or snow hits these glass light bulbs once they’ve been on for a few minutes, they can shatter. Therefore, LED light bulbs are going to last even in extreme temperatures, even if they have been operating for a very long time.
By choosing the right light bulbs can help ensure that people don’t have to spend so much time replacing light bulbs. Not only is this a cost savings, but it’s also going to be a Time Savings, and give peace of mind, ensuring that the light bulbs are going to be shining more consistently than any other light source.
Edmonton Electrician | Maintained Motion Sensors Work Longer
Whether people are purchasing a brand new motion sensor system, or if they are purchasing a residence or a business that has a motion detector system already installed, Edmonton electrician says people should understand the maintenance that they require. Many people don’t realize that they have to actually maintain their motion detector system, and simply install them themselves, or get an expert to install them and promptly forgot about them and that would be a huge mistake. Not only do they need regular maintenance to ensure they are in good working order. They also need regular testing, just like a smoke detector. Therefore, my understanding how to care for a motion detector system can help ensure that it lasts longer and does a better job of turning on the lights when they are needed the most.
One of the first things that people should be taking into consideration when it comes to motion detectors is that they need to be cleaned on a regular basis says Edmonton electrician. Whether they are internal motion sensors or external motion sensors. And whether if it is a residential building, a commercial or industrial building, the sensors on the system need to be cleaned on a regular basis. Internal sensors often get covered in dust. People only need to think about how much dust is on the top of their fridge if they don’t wipe it down on a regular basis. This dust can actually settle on the sensor, causing an interference and keeping it from turning the lights on when they are needed. Dusk can inhibits the ability to detect motion, and render the system useless. External sensors also need regular Cleaning, because dirt and dust can be blown onto the sensor with the wind, or through rain and snow. Therefore people should take a non-abrasive cleaner and a microfiber cloth and wipe down the sensors every few months. Or, more often if there has been inclement weather and the sensors are outside.
It is also very important that everyone who has a motion sensor system does is test them on a monthly basis. By testing them every month, just like they would with a smoke detector says Edmonton electrician can help ensure that they are in good working order. If people don’t test them regularly, and they realize one day that their system isn’t working, they won’t have any frame of reference for how long that’s been the case. However if they do a regular test and find that one day the system isn’t working, they will be able to call their expert in, and they can figure out if they need a new system or if there’s something that can be fixed.
By understanding the maintenance that a motion detector system requires and help ensure that homeowners and business owners alike are taking care of their system. It doesn’t require a lot of work, just ensuring that it is done on a regular basis will help keep their internal and external homes and businesses safe for years to come.