Edmonton Electrician | Motion Detectors Require Regular Maintenance

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Motion Detectors Require Regular Maintenance

One myth that many people often believe about motion detectors does Edmonton electrician is that they don’t require any regular maintenance. In fact, they say it’s one of the most common calls that they yet. People have just purchased a new business, or purchased a house, and are calling to have the old motion sensors removed and put new ones up. They are doing this because they believe the old motion sensors are not functioning, and they want to play with the new system. Edmonton. They don’t want business owners or homeowners to spend money when they don’t. Therefore, there are several things that people should keep in mind when it comes to their motion sensor to ensure that it is being kept in good working order at all times.

One of the very first things that people needs to understand, is that their motion detector system needs to be tested every month. This is just the same as a smoke detector. In order to protect his family and the home, it should be tested once a month. This is using a passive infrared radiation sensor, therefore people need to ensure that it is functioning at all times. And if not, that’s when they can call their Edmonton electrician and ask for help. By taking care and doing regular maintenance and upkeep on their system, people can ensure that it is always kept in good working order.

The second thing that people need to ensure that they are doing is cleaning their motion detectors on a regular basis. Even if it is a sensor that is inside a building. Buildup of dust on internal sensors can cause them to start malfunctioning. Therefore, people need to ensure that they are wiping them down with a non-abrasive cleaner as well as a microfiber cloth every few, or sooner if needed. External sensors have a tendency to get even more dirty, with winds and rain and snow. In inclement weather, that may cause more buildup of dirt and grime will need to be removed. People should be looking at them every few months at the latest, but if they’re doing a test every month, might simply want to wipe them down at the same time.

By being aware of all of the ways that a person needs to keep their motion sensor in good working order and help them do so says Edmonton electrician. If people are not aware of this, they can’t be expected to do it themselves. However when’s people do this in their business or at their home, they can keep doing it on a regular basis to ensure that they keep their motion detectors in good working order. This can be especially beneficial, or people who are looking to protect their family or to minimize crime in their area. The more efficiently their system is working, the more efficiently they are able to protect their family as well as their business, and in turn, their livelihood.

Edmonton Electrician | Motion Detectors Require Regular Maintenance

Many people may not realize that they need to maintain their motion detector system says Edmonton electrician. They seem to think it’s something that once they’re electrician install, they don’t have to think about it again. But in addition to regular testing, people need to ensure that they are doing regular upkeep and maintenance on their system that it is being kept in efficient and effective working order. Failure to do that means that people are putting their business, and their family at risk.

People can look at the style of light bulb that they are using in order to ensure that they have the best most working motion sensor possible. If people are using incandescent light bulbs, halogen light bulbs are fluorescent light bulbs. Edmonton electrician says that they may be. These bulbs cost a lot more to run than LED light bulbs. But more important than that, is the fact that they are made out of glass, and are therefore breakable. If people are not looking on a regular basis at their motion detector system, unknown, there light bulbs stopped working, either because they broke or because they ran out of our. However, Edmonton electrician says that LED light bulbs are the most durable on the market, because they are not in cased in glass. Also, they last far longer than most light bulbs, minimizing the amount of times that people have to replace them.

Another way that people need to ensure that they are keeping their motion detector system in good working order, is by being aware of false detections that may happen. false Detection might be something that a business owner or homeowner sees themselves. Or, it may come from a neighbour who is tired of the motion sensor Illuminating their house at irregular intervals, and when there’s absolutely nobody around. if this is the case, people should look for the probable cause before they call their Edmonton electrician. One of the most likely culprits would be electrical metre. The reason why, is because electrical companies such as epcor or Fortis are starting to put Wireless transmitters on all of their metres. This way, they will be able to easily read the metres without having to send someone in person to look at the actual metre Itself. if this is the problem, people simply have to call their electricity provider and ask them to please turn down the signal on their transmitter. This and fix the problem very quickly and easily, and will help ensure that they don’t get a bill from their Edmonton electrician to come out and about shoots a problem that doesn’t exist.

when people understand what is involved in maintaining a motion detector system in addition to what is involved in picking one out and installing it, they may find that they have more luck in the motion sensor achieving its objective says Edmonton electrician. It’s very important that people not only choose the right one, but they ensure that the motion detectors that they have, well allow them to protect their family and their business.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3