Edmonton Electrician | Older Homes Need Upgraded Electrical Systems

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Older Homes Need Upgraded Electrical Systems

Many people like to purchase older homes says Edmonton electrician. And then renovate them and either live in them. Or sell those homes for a profit. These homes often need upgraded electrical work done.

The reason why, is often because homes that were built in the sixties, seventies and eighties. Typically do not have their wiring up to code. And the code was created to keep people safe.

One of the first things that they may want to do. Is at electrical circuits. So that they can have more outlets to plug things into.

Because homes that were built that long ago. Could not anticipate the energy needs of people in the future. Therefore, more circuits are needed in the home, which typically includes getting a bigger panel.

And there is two options that their Edmonton electrician will give people when they need a bigger panel to allow more circuits.

They can either install a sub panel, and swap some circuits over. And this will work to allow people to have or circuits added. To increase the ability to consume more energy in the home.

Or the second option is for people to get a whole new panel with more than enough space for what they need now. So that they can anticipate adding more circuits in the future as well.

And while people might be tempted just to add a sub-panel for the immediate future. The recommendation is typically for people to just add a whole new panel.

Continue…

Especially if they have a panel from the sixties, because there are going to be so many other electrical code violations. That they can fix many problems just by installing a whole new circuit breaker panel in their electrical room.

However, another reason why people might want to contact their electrician to quote on upgrading the electrical services in their older home. Is simply to fix problems before they start.

A great example of this, is if people have aluminum wiring in their older home. Which was very common in the sixties, seventies and eighties.

Although aluminum is no longer standard because of how quickly it can overheat. And in overheated wire can cause a fire.

Therefore, they may want to get a quote from their electrician on switching over aluminum wire to copper. So that not only can they be safer. But they can bring their house up to code as well.

The next thing that the electrician might do. Is look to see if the home is grounded. In some older homes, only at two wire scenario was created. Which means all of the circuits lack a ground wire.

While it is possible for an Edmonton electrician to fix this, they must add ground fault breakers for every un-grounded circuits. And while this can be an expense that homeowners are not anticipating.

It is very important that it is done, so that the house can be grounded, to bring it up to code. As well as for safety reasons as well.

Edmonton Electrician | Older Homes Need Upgraded Electrical Systems

When people are purchasing older homes, it is very beneficial for them to contact an Edmonton electrician. In order to look at all of the electrical services that they have.

Especially in older homes from the sixties, seventies and eighties. Not only are many different code violations that are likely going to exist. Due to the code changing over the years.

But also, because there can be older electrical components. That are at risk of failing. One of the most common things that an electrician finds is the circuit breaker.

The job of the circuit breaker, is to stop the flow of electricity going to overloaded circuits. So any time a circuit has more than 15 A flowing through it at any given time. The circuit breaker should stop the flow of electricity.

People can cause this to happen, if they are not careful of what they are plugging into a circuit at the same time. Such as having their flat iron plugged in and turned on. As the same time they are using their blow dryer.

What will happen if the circuit breaker is not working properly. Is that the wire starts getting hot as it tries to deal with a flow of electricity that was never designed for.

And if the circuit breaker does not stop the flow of energy. That wire will just continue to get hotter, causing a larger and larger risk for fires.

More…

The most unfortunate part about a circuit breaker failure. Is that people will not know that there circuit breaker is not working. Until they have a circumstance like a fire break out in their house.

Therefore, when they call on an Edmonton electrician to take a look around their older home. They will be able to find out if there circuit breaker is functioning well. Or if it should be replaced.

Especially if people have a brand of circuit breaker called Federal Pacific. They should be changing that circuit breaker out. Not only because it is very old. But because it has a 70 to 80% known failure rate.

Which has been known to cause twenty-eight hundred house fires in the United States alone every single year. Those fires results in thirteen deaths and fourteen million dollars in property damage each year alone.

Therefore, it is in a person’s best interest to have their electrician fix this problematic circuit breaker. So that they never have to find out the hard way that it has stopped doing its job spontaneously.

In fact, even if people do not have a Federal Pacific circuit breaker. If the breakers start tripping more often than usual. And they have not changed their energy consumption.

This is often a sign that the circuit breaker is getting ready to stop working completely. And is a good reason why people should contact an Edmonton electrician to replace there circuit breaker sooner rather than later.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3