Edmonton Electrician | Overloaded Circuits Can Start Fires


Contact Info

Our Office

14927-69ST NW
Edmonton, Alberta


Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.


Emergency Service

Emergency fees apply

Get in Touch

(780) 935-0622

Edmonton Electrician | Overloaded Circuits Can Catch Fire

Many people may be putting their home at risk for starting an electrical fire says Edmonton electrician. And not even be aware why. they may not understand the danger of overloaded circuits. And how quickly a fire can start because of it.

How electrical fires start says Edmonton electrician. Is when more electricity is plugged into the plug-in. Then it was designed to handle. The wires will get physically hot to the touch. As they struggle to manage the flow of electricity the wires were never designed to handle.

The longer the wires stay hot, the higher the likelihood is that they are going to ignite some of the flammable materials around them.

the danger of electrical fires. Is that they start undetected. And can burn for a long time still undetected. They will burn throughout the house, travelling inside the walls. Consuming all of the oxygen in between the walls of the house.

By the time the fire eats its way through the wall, and makes its presence known. It has likely spread to all areas of the house. Making it very dangerous to escape from. An important that people evacuate immediately.

This can easily be avoided simply by people not plugging more than 15 amps into any plug-in at any given time. Each electrical outlets that can only handle 15 amps. And by avoiding plugging too much into one plug in at a time. Can eliminate the risk of an electrical fire starting this way.


Unfortunately, many people are not aware of this. And will continue to plug things into the plug-in. That exceeds 15 amps. Devices such as an air conditioner, a space heater, hair dryer, or a flat iron. I’ll take 15 amps or close to it.

And so plugging anything in to the plug-in other than that device. Could put a person at risk for having an electrical fire in their house.

however, if people are using electrical plug in extending devices such as octopuses. Or if they are using Power Bars. It becomes even easier to plug more than 15 amp into the plugin. Because that gives them the capability of plugging anywhere between 4 to 10 more things into the outlet than it was designed to handle.

If people need to use a power bar, or an electrical extending device. Edmonton electrician says they should follow some simple rules. And the first one being making sure that it has the letters c s a stamped on it. Because this indicates that it has been inspected and been safe to use in Canada.

the next thing that people should do, is ensure that their power bar comes with a surge protector. So that if the breaker happens to fail. They are going to have the surge protector that can be a backup system.

And finally, people can be very mindful of the amps that each of their devices will draw in electricity. So that they can avoid plugging more into the plug-in then it can handle.

Edmonton Electrician | Overloaded Circuits & Fires

The reason why people use so many Power Bars says Edmonton electrician. Is because they may not have enough electrical outlets in their home. This is especially true during the holidays, when people have even more things to plug in. From lights on their house and decorations in their yard. Two Christmas trees, and even space heaters because it is even colder in their house than ever.

However, the use of power bars or Outlet extenders can be very dangerous. Because it allows people to overload the outlets very easily. When this is the case, they are putting their house at risk for an electrical fire. And there are more electrical fires in December than any other times of the year because of the amount of electricity people are using.

Instead of using Power Bars to be able to plug more things in. people should understand that there is a better alternative. That can help people avoid an electrical fire.

That is calling their Edmonton electrician and asking them to install more plug-ins into their home. This is actually easier, faster, and more cost-effective than many people assume. And a lot of people don’t even realize that this is an option to them.

Especially in homes that were built several years ago, such as 50 or a hundred years ago. Installing more plugins is going to not only decrease the risk of an electrical fire. But increase the convenience and usability of their home. Especially with the large amount of electrical devices that people have nowadays.


All their Edmonton electrician has to do, is add more switches to the breaker box. And then run additional electrical wire through their house. And cut a small hole where the new Outlets are going to be.

In order to prepare for the electrician to come in and install more Outlets. People need to figure out how many outlets they need. And in what rooms they need more Outlets. They should go through their entire house, and count the number of power bars, or electrical extenders or extension cords that are in use in each room.

Then, they will be able to give their electrician the list of what rooms need more electrical outlets. And how many they will need in each room. People should be very mindful not to forget rooms such as the utility room, sewing rooms, or laundry room.

The Edmonton electrician will also be able to inspect their breaker box. And well breaker boxes typically last for a very long time. If people have a federal brand breaker box. They should get rid of it immediately. Because these have been well-documented to be very dangerous.

The Edmonton electrician can come in, add more outlets, and check to make sure that’s the breaker box that they have an operation is safe.

This is a much better alternative for people to be able to increase their homes capability of handling electricity. Then buying Power Bars and extension cords to make up for the lack of outlets in their home.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3