Edmonton Electrician | Stop Moving Outlets
I will it is a danger says Edmonton electrician. But many people do not know this. Or, they do know that. They should not overload their electrical circuits. Because they will trip there circuit breaker. Are unaware of the danger of that.
Ultimately, the circuit breaker is definitely designed. To stop the flow of electricity. To any circuits that are overloaded. Which is the failsafe, that can prevent many disasters such as electrical fires in a home.
However, the reason why people should not default to the electrical circuit breaker. Doing its job hundred percent correctly. Is because these devices are first of all, not infallible.
Which means they will fail from time to time. And there is no way of knowing. If and when that will happen. There is no way of telling if the circuit breaker is not functioning today. Or when it may not stop the flow of electricity.
To an overloaded circuit. A good rule of thumb says Edmonton electrician. Is that the older the panel and circuit breaker is. The more likely it is starting to fail. However, there is no specific timeline on this.
A good rule of thumb for homeowners to follow. Is if they notice that there circuit breaker. Is being tripped more often, with absolutely no reason. Why it should be tripping.
Such as the energy usage in the house has not changed or increased in recent months. Then this is a great indication. That the circuit breaker is getting worn out.
However, rather than call their Edmonton electrician. To get them to check out the issue. Many homeowners simply see this as an inconvenience. And get frustrated.
May have to go downstairs, into the dusty back corners of their basement. In order to find the circuit that has been turned off. And turn it back on again. However, this is the warning sign that homeowners should be looking for.
That will tell them that they should possibly. Think about getting their electrical system looked at. Or place there circuit breaker and panel. However, when homeowners finally experience.
The circuit breaker no longer being triggered intermittently. With no apparent cause, they may feel. As though the problem has finally corrected itself. When in actuality, the circuit breaker has simply stopped working together.
And rather than no longer being an inconvenience. It has left the family at risk. Because an overloaded circuit will now not be turned off. And there will be a significantly higher risk. Of an electrical fire in their home.
Good clues that tell a homeowner. That it is time to call in an electrician, such as the experts. At Hauer Power located in Edmonton is if. There circuit breaker starts being tripped for no apparent reason.
They are using more and more electrical outlets, power bars, or extension cords. To be able to plug more devices in. Or if they would like an electrician. To make sure that there panel is in good working order.
Edmonton Electrician | Stop Overloading Outlets Today
Homeowners should be wary says Edmonton electrician. If the electrical panel in their home. Is more than a few years old. While the wiring in home can be functioning well for many years.
They should always be getting a second opinion. Such as having the experts do a walk-through of their home. To make sure of that. For example, many people have older homes.
That they are renovating, and they should get an expert. To check out the serviceability. Of their electrical panel for many different reasons. One of the first reasons is, because electrical panels often need to be upgraded.
Especially in older homes, they did not need. To plug as many electrical devices in. Therefore, the electrical panels are quite small. With few spots available. For additional circuits in the home.
Nowadays, not only do we have. Multiple televisions, computers. Gaming systems, not to mention things like cell phones and tablets. That also need to be plugged in to charge.
We are using more electricity than ever before. And people who are renovating an older home. Are most likely going to want to. Add more electrical circuits. So that they can add more electrical outlets.
To be able to plug more devices in. For example, in a home that was built. At the turn-of-the-century, the only electrical outlets. In the kitchen was for the clock. And it was placed. High up on a wall.
Seeing as how the kitchen now is the one room of the home. That uses the most electricity out of any of them. With a refrigerator, stove, microwaves and dishwashers.
People should contact their Edmonton electrician. When they live in an older home. To see if the electrical panel needs to be upgraded. To a newer model that will work better.
And even if it is in good working order. They still may want to replace it. With something newer, and larger. So that they can add more circuits to their home. And avoid overloading the electrical circuits they do have.
And finally, the last reason why. They should contact their Edmonton electrician. To look at their electrical panel in their older home. Is because some older panels. Are a brand that is known to fail often.
Federal panels are particularly dangerous. And 90% of all of the house fires. That were started due to faulty wiring. Started, and homes that had federal electrical panels. This is very dangerous.
Because people count on the circuit breaker. To stop the flow of electricity. When a circuit is overloaded. And when that is no longer functioning. There is no alarm bell.
Or indication that it is not working. It simply allows overloaded circuits to remain overloaded. If homeowners want to avoid problems. They should get an expert opinion. And remove any electrical panels. That are older.
For more information, homeowners can talk to the experts at Hauer Power. By sending an email, phone call. Or visiting their website. The sooner people call, the sooner they can have peace of mind for themselves and family.