Edmonton Electrician | The Importance of Properly Installed Emergency Lights

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | Correctly Installed Emergency Lights

Business owner should understand that it is of Paramount importance to have emergency lights in their business says Edmonton electrician. Because these are going to be what will help with their self as well as their customers evacuates. If the worst-case scenario happens. And there is an emergency, and everyone needs to get out of the building safely.

This means that not only do they need to have the appropriate amount of exit lights. But they also need to be installed properly, to ensure that they are pointing in the right locations. To ensure people can safely evacuate.

Edmonton electrician says that the lamps that are on the emergency lights should be pointing at the floor. So that they can create a continuous beam of light, Illuminating the way out of the building. Many people might think that the emergency lights simply needs points through the head, because they are there to provide ambient Lighting in case the lights go out in the building.

Whoever this is not the case, and rather than have the emergency lights being pointed straight ahead, at the mall or even on the ceiling. Edmonton electrician says they need to be pointed at the floor. But not just anywhere on the floor.

They need to be pointed in such a way that people can easily see the escape room on the floor. In case there is a fire, and a smoke fills the entire room, and the floor is the only thing that people can see.

This is why I’ve been so nurse should always call on an Edmonton electrician to help them figure out how many emergency lights they need. Purchased the correct emergency lights for their use. And install them.

Their Edmonton electrician will be able to install them correctly, and in the best locations. But also, in such a way that will allow the Escape Routes to be clearly illuminated in the case of an emergency.

When’s the Edmonton electrician has installed the lights. They can come back on a monthly basis to test them. Because it is of Paramount importance that the lights get tested 30 seconds every single month to ensure they are in good working order. Just like a smoke detector, business owners needs to ensure that they will be working at the time of an emergency.

The next thing that needs to happen, is that the business owner will need to ensure that the emergency lights get tested once a year for 90 minutes. The reason why it needs to be tested for an hour and a half. Is that’s how long they are expected to work in the case of an emergency. To ensure that everyone can get out safely. If they only had to work for half an hour, it might not provide light for everybody to escape properly.

Therefore, if a business owner is too busy to be doing the tests themselves. They can call on their Edmonton electrician to take care of that for them. Who can also provide the necessary maintenance that they might need that they discover during their test.

Keeping their emergency lights in Prime working order. Is going to help ensure that a business owner did not waste their efforts putting up emergency lights so that they can be used in the worst-case scenario to help keep everybody safe.

Edmonton Electrician | Properly Installed Emergency Lights

It doesn’t matter what type of business and entrepreneur owns, Edmonton electrician says they need to have functioning emergency and exit lights. The exit lights will illuminate the ways out of a building in case of an emergency. And not only should they be lit at all times. They should also be lit when the power is cuts, to help people see in the dark. The emergency lights will come on in case of a power outage. And we’ll help illuminate the evacuation route.

Therefore, business owners need to ensure that they have enough emergency lights. And that they are installed in the best locations. Edmonton electrician says one of the biggest problems is that once the emergency lights are installed. A business owner doesn’t think of them again until they are needed to be used.

A business owner might make changes to the floor plan of there office, adding cubicles, building walls, or putting a variety of different Furniture in different locations. While this seems harmless. Edmonton electrician says what this does, is compromised the lights ability to point to the evacuation route. If furniture and walls are in different locations.

Therefore, business owners also needs to keep in mind their emergency lights. And if they’re going to make changes to the floor plan of their business. Or add walls. They should call their Edmonton electrician in. To ensure that the emergency lights are still in the best locations. And are still Illuminating the safety evacuation route.

Business owner should also ensure that they are installed properly. And they may think that they’re saving themselves lots of money by doing it themselves. However, with each unit being one to $200 each. The cost of having an Edmonton electrician install them is very small. But ensuring that they are done correctly is not small at all.

Business owners May compromise their emergency lights ability to work if they install them themselves. And they may not realize that difference emergency lights have different voltage factors. And if the voltage requirements are larger than their ballast can handle. It can create a ton of problems.

The voltage difference might cause the ballast itself to be overloaded, causing damage to the ballast, or to the wiring of the building. This will be far more expensive to have to call in Edmonton electrician to fix the buildings wiring. And likely not covered under their insurance.

Also, if they try to install the emergency lights themselves, and they overload the ballast, it could end up frying the equipment, rendering it the emergency lights themselves not functioning. And if a business owner will have to replace all of their emergency lights. Then also will be much more expensive and it would have been to call an Edmonton electrician to install these in the first place.

Dammit an electrician can also ensure that the lamps are pointed in the right direction. And that they are installed in the correct places. We will also be able to tell if there are not enough emergency lights in a room or hallway. So this professional help can be extraordinary really important. sore that not only are there emergency lights in a business. But that they are installed properly, and we’ll help achieve their purpose.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3