Edmonton Electrician | Things To Look For in Motion Detectors


Contact Info

Our Office

14927-69ST NW
Edmonton, Alberta


Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.


Emergency Service

Emergency fees apply

Get in Touch

(780) 935-0622

Edmonton Electrician | Things To Look For in Motion Detectors

One of the most common reasons why people contact Edmonton electrician to get motion sensors installed into their business or their home is because they want to save money on their electric bill. All this works, is when people install motion sensors in areas of their home or business, and sure that the light comes on when it’s needed, but it is not raining when it is not. This is extremely beneficial for if people are not in the area be able to turn off the exterior light when it turns to Daylight. For example, when business owners want to leave their exterior lights off when they leave for the weekend, but they don’t want them on all weekend long. Therefore, many people see motion detectors as a great solution, to ensure that they and save money on their power bill.

However, if this is the goal or the business owner or the residential home owner, there are many things that they need to take into consideration to ensure that they are ending up with the best motion sensor custom possible. One of the first things that we need to consider is what type of lightbulbs they should have. While this doesn’t seem like it should be one of the first considerations, and says that it actually is, because people want to ensure that they are getting a motion sensor system that allows them to use LED light bulbs. LED light bulbs are the newest form of light sources, but they are actually some of the most effective ones. Not only are they the brightest light bulbs on the market, they’re also the most cost-effective to use. These light bulbs take only one tenth of the power of traditional light bulbs, which equal less power consumption. If someone wants to minimize their power consumption by installing motion-sensor, they shouldn’t also be using the most effective light bulb at minimizing power consumption as well.

Another way. Using an LED light bulb is going to help people minimize the cost associated with lighting their home or business is in its durability says Edmonton electrician. In fact, this is especially beneficial if people are using the motion sensor externally. People need to understand that incandescent light bulbs, halogen light bulbs and fluorescent light bulbs are all glass encased light bulbs. In addition to being glass-encased, they also heat up when they are used. This doesn’t seem like it’s going to be a very big consideration, seeing as how they shouldn’t be used long-term while being on. However the reason why this is important, is if they heat up after only a few minutes of use, what this is going to do, is cause them to be hot. Edmonton electrician says that if there is snow, wind, or rain, that hitting a hot, glass light bulb could cause it to shatter. Therefore, if people want to minimize the amount of times that they have to replace actual light bulbs they should get an LED light bulb system. LEDs are light emitting diodes that are in hard plastic shell. They are more robust than any glass light bulbs.

Edmonton Electrician | Things To Look For in Motion Detectors

it’s very important that people are choosing the right motion detector system for their needs as Edmonton electrician. People might think that all motion detector systems are the same and this is simply not true. People need to have special considerations for residential or commercial and Industrial. And they also need to have special considerations for if it’s going to be internal or external use. My understanding differences can help people make the right decision. They can always contact their Edmonton electrician to walk them through the process so they end up with the attorney.

In addition to figuring out the applications, whether it’s to help aid a security camera having the light to the situation. Whether it’s to protect children, pets or family. Even how it’s mounted weather it’s going to be mounted on a ceiling or a, is going to need to be taken into consideration. In addition to that, people also need to be aware that there are usually two to three different sensitivity settings on their motion detectors. The reason why this is important to note, is because those sensitivity settings need to be changed depending on what the application is. For example, if a person is using the motion sensor externally but it is going to be close to a busy Street, Edmonton electrician does that though sensitivity settings need to be turned all the way down. The reason why, is to avoid blinding drivers as they the motion sensor. By blinding them, people may inadvertently be causing car accident.

Another example of a sensitivity setting that needs to be on low, is for a homeowner who wants to have a light come on by their when their family gets home and it’s dark, so it can light the way. Or so that they have light to let their dog outside at night. These don’t need to have an extremely fast sensitivity is Edmonton electrician, because the people that are triggering them know that they are going to come on.

However, or an external commercial or industrial setting, or residentially out onto a back Lane, people may want and a sensitivity settings all the way up. The faster the light can come on is going to be the faster that is going to deter crime. Many people are getting motion sensors in order to keep criminals from thinking that they are an attractive Target, people will be able to minimize the amount of criminal activity in their area by turning up the sensitivity in their motion sensors. By being aware of all of the difference in a motion detector and help people ensure that they get the right motion detector for their needs. Safe, they are minimizing their power bill, and they are helping their loved ones see in the dark.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3