Edmonton Electrician | What to Look for In Motion Detectors

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | What To Look for In Motion Detectors

There are many things that people should take into consideration that will help them choose the right motion detector for their need as an electrician. However, if they are unaware of all of the different features, they may not end up getting the right one for their needs. Therefore, they should get informed about all of the different features in a motion detector system and use the expert to help them pick the system.

one of the most common calls that Edmonton electrician yet, is people who already have motion detector systems, and think that they are not working properly. Then ask for a new system to get installed. However, Edmonton electrician says that’s not necessarily needed, that they should take a few things into consideration with the system that they have first in order to figure if it actually isn’t working or if there’s something that we can make it functional again.

One of the first things that Edmonton electrician says people should look for, is if the reason why they think their motion detector is not working is because it’s giving false actions, they should understand that false detections are not necessarily because their system is broken. For example, can be caused by electrical interference. Most commonly, these electrical interference has come from people’s electric metre. Electrical companies are starting to put in Wireless devices into their metres, so that they can read people’s electricity reading without actually going door-to-door and reading each metre in person. Weather, as they started doing this, people found that their motion detector started getting a lot of false detection. This is the case, the recommendation is for people to Simply call their electrical provider and ask them to turn the signal down. It can often fix problem instantly.

Another reason why people may believe that their motion detector is not working, is because there motion detector also called a PIR which stands for a passive infrared radiation needs to be clean. One thing that people may not realize, is they should be cleaning their motion detector every few months at a minimum, if not more electrician. In fact, Edmonton electrician says especially if it’s outside, it can be exposed to the elements which can cause a buildup of dirt or crime on the sensor. also, if it is an internal sensor, dust build-up can cause the sensor to stop working as well. Edmonton electrician adjust people cleaning them with a microfiber cleaning cloth and a non-abrasive cleaner every few months or earlier as needed.

People need to understand that it’s not just purchasing a motion detector, but they also needs to maintain their motion detectors as well. By keeping them in peak operation, they can ensure that they will have a system that last them for a long time, protecting their home, their work, or their job site. Therefore, before anyone calls their Edmonton electrician thing that a motion detector doesn’t work, they should inspect the unit, clean it, contact their Electrical Company to turn down the signal and see if that works first.

Edmonton Electrician | What To Look For In Motion Detectors

Many people may not realize that sensitivity settings are going to be important when they are installing a motion detector says Edmonton electrician. when in fact, that should be one of the most important considerations that people have when purchasing a motion detector system. Therefore, they should consult the experts and let them know what’s their application is, whether it’s residential, commercial or industrial. And what the goal of installing it is. Is it to minimize crime, increase safety, or save money on power bills. All of these things will be taken into consideration and people can end up getting the most efficient and effective motion detector system for their needs.

People should first understand that if it’s a residential area, they’re going to want to have their sensitivity settings turned way down. This may seem contrary to what they believe, thinking that they want to protect their home by minimizing crime and therefore it needs to be turned way up. However, people should take into consideration that that they have neighbours, and probably more than just a couple neighbours. They want to ensure that they are not upsetting any of their neighbours in close proximity to them by having bright lights shine every single movements that happens in the neighbourhood.

Something else that people need to take into consideration, is if they live by a busy or semi busy street does Edmonton electrician. This is also another reason why they’re wanting to have the sensitivity of their motion sensors turn way down. It can create a driving Hazard by blind drivers going by, if the sensitivity settings are turned to high up in a residential area.

However, for commercial and Industrial applications, the sensitivity settings need to be high, especially if it’s going to deter does Edmonton electrician. Is there are no neighbours to worry about, people and business owners of light should ensure that they are putting the highest sensitivity settings, because the sooner the light will come on, the more effective it will be at deterring crime. They also want to ensure that they have the longest light settings when it’s a residential or commercial application, so that longevity of the light and also deter crime.

Also, people should take into consideration if the motion detector is going to be inside or outside. In a residential home, having the sensitivity turned way up when it’s an inside motion detector and end up with blinding people. For example, if people have a motion sensor in a bathroom to help people see when they have to go to the washroom in the middle of the night, you should always have the sensitivity down, so they don’t end up blinding people in the middle of the night.

When Edmonton electrician can understand the application, as well as the goal of the motion detector, they can make recommendations that ensure the best fit for everybody. This will ensure that people can be safe, keep calm down, and avoid upsetting neighbors.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3