Edmonton Electrician | What You Should Look For In Motion Detectors

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Edmonton Electrician | What To Look For In Motion Detectors

Many people understand how important it is to have a motion detector says Edmonton electrician. But without consulting a professional, they don’t understand what things they need to look for. There are things to consider such as sensitivity settings, brightness settings, what light bulbs to use, what photocells are, how to avoid getting false detections, and what type of system should they get should they get passive infrared radiation, microwave, weights motion sensors, non-contact motion sensors, ultrasonic vibration or area reflective. Without knowing the answers to all of these questions, homeowner and business owners alike will be able to ensure that they get the best motion sensor technology for their use So that they can save money on power bills and put a damper on crime in their area.

The first thing that business owners and homeowners it should be looking for is motion sensors that have the right light bulbs. Edmonton electrician says that they can think about light bulbs in terms of what’s going to give them the most cost savings electricity wise. But also what’s going to ensure that they’re able to impact crime the most. Well motion sensing equipment can be purchased that use incandescent light bulbs, halogen light bulbs, and fluorescent light bulbs. Edmonton electrician recommends that business owners and homeowners get the systems that take LED light bulbs. These are the newest systems on the market, and there’s many different reasons why people should choose LED light bulbs.

In terms of energy consumption, LED light bulbs consume the least amount of energy. While fluorescent light bulbs were heralded as an extremely cost-effective light bulb. LED light bulbs are even more cost-effective than fluorescent light bulbs. in addition it to consuming the least amount of energy, LED light bulbs also last the longest than any other light bulb on the market. Therefore, having to replace them the least amount, and having them consume the least amount of Power are going to help keep people’s costs down when using motion detectors. Since many homeowners and business owners alike have opted for motion detection system so that they don’t have to pay the electricity bill by having the lights on all the time, this is a Natural Choice.

Another thing to take into consideration with LED light bulbs says Edmonton electrician is that LED light bulbs are considerably more durable than any of the other traditional light bulbs weather there in 10 doesn’t, halogen or fluorescent. LEDs stand for light emitting diodes, which are encased in a hard plastic shell, that are considerably more sturdy and robust than anything glass. The other light bulbs are encased in glass, which not only are more breakable. But they also pose a risk to be shattered if they are rained on, or snowed on after they have been turned on for a few minutes. Edmonton electrician says this is because they all emit heat, and when the rain or snow falls on the heated glass case, it will shatter. While fluorescent light bulbs are often known for not getting very hot, they get hot enough to shatter in weather.

By choosing the right motion sensor system with the right light bulbs, can help ensure that business owners and homeowners are keeping themselves completely protected as well as continuing to save money.

Edmonton Electrician | What Motion Detectors Are Good For

Many business owners and homeowners know that they wants to use motion detectors to keep their property safe says Edmonton electrician. But they don’t know the first things about motion detectors, and if they don’t consult the professionals, they might end up getting the wrong system for their needs. Not only do they need to take into consideration what type of motion sensing technology they want to use, but they also need to take into consideration where to install them, and how to avoid shining lights into areas they don’t intend to. They also needs to ensure that they are using the right brightness levels and sensitivity settings to ensure they are getting the best results for what they need.

The first thing that people should be taking into consideration whether they are getting a motion sensor for their home, for their commercial or industrial business Is what the sensitivity settings need to be for outdoor use. Indoor and outdoor motion sensors require different sensitivity settings. When used outside, Edmonton electrician recommends that people use the lowest sensitivity setting possible. The reason why, is because people want to avoid the motion sensor being turned on by the wind rustling trees or shrubs, or even blowing debris past the sensors. They also want to ensure that small animals like squirrels and rabbits or birds Don’t trigger the motion sensor. And they also want to ensure that oncoming traffic does not trigger the motion sensor as well. Therefore, external motion sensors needs to have the sensitivity settings set to the lowest possible setting.

Internal sensors will have different sensitivity settings dependant on what their use is. For example says Edmonton electrician, if the use is residential, people should be taking into consideration what they are using it for. To illuminate the hallways or the bathroom for residents who are Mobility impaired, or for young children, the brightness level should be set to low. Therefore, when they wake up in the middle of the night and go to the bathroom, they are not blinded by the lights in the hallway or the bathroom when they go to use them.

On the other hand says Edmonton electrician, the sensitivity settings should be turned all the way up if it is a commercial setting, and they want to illuminates a storage area, a parking garage, or a stairwell. To help keep people safe, especially as they are going from one brightly lit area to an area of Darkness, the brightness levels should be at their maximum, with the highest sensitivity settings, to ensure that people are being kept safe as they your way through this area.

sensitivity settings and brightness levels can be kept at a maximum in a residential setting as well, for areas like a garden shed, or a crawl space in a house. This can help ensure that people who may be accessing these areas with their hands full are able to do so safely, and have bright light even if they can’t flip on a switch or pull a string to turn on the light bulb says Edmonton electrician.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3