Edmonton Electrician | Why Upgrade Older Circuit Breakers?
There are many different electrical systems in an older home says Edmonton electrician. And if people have recently bought a home in order to renovate. They should get these systems checked out.
The reason why, is because out of date or degraded electrical systems can be dangerous. And need to be replaced right away to avoid things like electrical fires breaking out in their home.
This is especially important as people tend to find. That older homes do not have enough circuit or electrical outlets for their needs.
They will discover this when they have to start using power bars in order to plug-in all of the things that they have. In almost every single room of their home.
When this happens, they are risking overloading their circuit. That can only handle the flow with 15 A of electricity at a time. By using a power bar, people have the ability to plug-in much more than that.
And typically, the circuit breaker is responsible for cutting the flow of electricity to an overloaded circuit. So that the overheated buyer does not cause a fire.
However, in older homes, the circuit breaker is often worn out and might fail either occasionally. Or it might simply no longer work properly.
And in this case, Edmonton electrician says people are putting their home at risk. Because this could trigger an electrical fire in their home.
Therefore, people who have recently purchased older homes should immediately call their electrician. In order to inspect all of their electrical services.
Not only will they be able to give them a quote on what it would cost to upgrade everything in order to bring it up to code.
But also, they will let the homeowner know exactly what they think needs to be done first. In order to keep the home as safe as possible.
In most cases, they will look at the circuit breaker to see if it is working or not. And if it is not, this is one of the first things that they will recommend homeowner upgrades.
But also, they will look at the specific brand of circuit breaker that homeowner has as well. And if they have a Federal Pacific panel. They will recommend this gets replaced immediately as well.
The reason why, is because this specific brand is known to have an extremely high failure rate of 70 to 80%. According to the research done by Dr. Aaron Steen.
Because it is known to fail this often. The research shows that approximately twenty-eight hundred house fires a year in the United States alone can be attributed to this brand failing.
And that also translates into thirteen deaths as well as over fourteen million dollars in property damages. And that does not even have statistics on Canada.
Therefore, in order to keep home as safe as possible. Edmonton electrician is trying to remove every single federal Pacific circuit breaker that they come across.
By calling on their electrician. Homeowners can find out exactly what they need to upgrade in their home. To keep it as safe as possible.
Edmonton Electrician | Why Upgrade Older Circuit Breakers?
It is extremely important for people to understand that older homes may need more electrical service upgrades according to Edmonton electrician. Not only because the electrical code has changed significantly.
But also because old age can cause many electrical components to degrade for simply wear out in older homes. Especially those built between 1960 and 1989. Each puts the home at significant risk.
Not only are many older homes not grounded. Because they only have a two wire scenario. Which means an electrician will need to add a ground fault circuit breaker to each of their circuit.
And not only this bring their home up to code in this particular area. But if they do not get this done, having an underground house is extremely dangerous.
The next thing that they might want to have looked at is if the electrical wires in the home are aluminum. That should be upgraded to copper wires as well.
The reason why, is because aluminum wires tend to overheat. Which can result in fires being caused. Especially if a homes circuit breaker is not functioning well.
If the circuit breaker is not functioning. They might want to get their electrician to add a whole new panel. Which will also give the ability to add more circuit now. As well as in the future.
At that time, the electrician can look at the wires going into that circuit panel. To see if they are in good shape or if they need to be replaced.
And also, they may not be up to code. Because homes built in the sixties, seventies and eighties. Only needed an 8 gauge wire. But now the code requires wiring going into the panel to be 6 gauge.
However, it is also very important that their Edmonton electrician tests their circuit breaker to see if it is working. And to also let homeowner know what it will be like if there circuit breaker starts wearing out as well.
An example of this, is if the circuit breaker is starting to trip a lot more often. Even though a families energy consumption has not changed. This is often an indication that it is wearing out.
And especially if it has typically been tripping more often. And then suddenly stops, even when families energy consumption does not change.
This often means that the circuit breaker is no longer working. And that they should call in Edmonton electrician to replace it right away.
In fact, pre-emptively calling their electrician as soon as they buy the house. In order to get an inspection done. As well as a list of what needs to be upgraded and in what order.
Can help prepare homeowner for exactly what they need to do to upgrade their electrical services. And which ones are the most important, or the most dangerous to not upgrade first.
Because of how important the electrical components are of a home. The sooner people do this after buying an older home, the better.