fbpx

Electrical Contractors Edmonton | Three Phase Power

780-935-0622

Contact Info

Our Office

14927-69ST NW
T5C-0J3
Edmonton, Alberta

}

Regular Hours

M-F: 7am – 4:30pm
Evenings, Weekends & Holidays by appointment.

r

Emergency Service

24/7/365
Emergency fees apply
v

Get in Touch

info@hauerpower.ca
(780) 935-0622

Electrical Contractors Edmonton | Three Phase Power

When people are working on the electrical systems, they need to hire electrical contractors in Edmonton. Because they will know, but the correct way. To wire the building will be.

Electrical Contractors Edmonton

Based on the application of the building. Such as residential, industrial or commercial. To put in the correct power phase. Such as a single phase, a split phase. Or three phase power.

In residential scenarios, most electricians. Are going to install single phase power. This is going to be good for powering the most common devices. Within a home, such as lights, plug-ins.

Microwaves, blenders, and computers for example. However, single phase power. Is inefficient for anything with a motor. Which is why electrical contractors Edmonton. Will put three phase power.

In any applications. That are going to be running powerful motors. And also, why three phase power is not necessary for a residential application. The main difference between single phase, and three-phase power.

Is that three-phase power. Uses more wires, and more copper. Ultimately, is more expensive. Therefore, three-phase power is only installed. And applications that actually require very powerful motors.

People might argue the point. Saying that they have motors in their home. Such as the living room fan. That is used to cool the room. The fan in the range hood, above the stove.

Read More…

As well as fans in the bathrooms. In order to eliminate moisture. In these very humid rooms. However, the electrical contractors in Edmonton. Will say. That those particular types of motors. Do not require more electricity.

For example, the types of motors. That are going to require three phase power. Our water pumps, for an industrial application. That needs to move a significant amount of water. Every single day.

Or, a fan that is needed. To clear toxic fumes. Out of a mechanical room. Ultimately, three-phase power. Is much more useful. In an industrial, or commercial application. Because that is how a business owner makes their money.

And it is well worth the additional cost. Of the increased amount of wires and more copper. That they will need, for the additional power. They need to have efficiency to make their money.

Which is why, even if they may not have powerful motors. Electricians, will still install three-phase power. In many commercial and industrial businesses.

Some people might ask the question. Why there is not such a thing as four, five or six phase power. And ultimately, it comes down to the cost of it. The increased cost. Of installing more wires and copper.

Four four, five and six phase power. Does not equal the same amount of efficiencies. Therefore, electricians do not install this type of power. And as such, it is not widely accepted.

For people who are doing electrical work. On their home, or in their business. Instead of trying to do the wiring themselves. In order to save money. And making a mistake. Installing an inefficient electrical system. They need to call the experts, at Hauer Power to help them out.

Electrical Contractors Edmonton | Learning About Three Phase Power

Many people do not know what single or three-phase power is says electrical contractors in Edmonton. Which is why they should always hire the experts to do the electrical work in their home, or in their business.

Ultimately, single phase power. It is most common. In residential applications. And are used to power lights, electrical plug-ins. Computers, dishwashers, kitchen appliances for example.

However, some residences need more. Then just single phase power. Because they are powering electrical devices. That take more than hundred and 20 V. Some people assume that they will then go to three-phase power.

And while three-phase power can handle significantly more volts. It is not necessarily cost-effective. In a residential situation. It has a much higher cost. Because it uses more wires and more copper.

Therefore, it is very hard to justify. Such a high cost, in home. Therefore, while two phase power is not a thing. Electrical contractors in Edmonton will do what is called a split phase.

Split phase is effective, if people are going to be utilizing large equipment. Such as hot tubs, air conditioning units and stoves for example. A split phase, is different than a two phase.

Because it comes off of the same source. And then splits, into different transformers. In order to handle the increased power requirements. It changes the ability to handle 120 V at a time.

Read More…

Two being able to handle machines and equipment. That are 240 V. However, homeowners will be remiss to find equipment. To run in their home, larger than that.

Which is why most residences will never have three-phase power. Commercial and residential businesses however. May very well be needing to plug-in. Devices that take more than 240 V.

And especially because they are going to be earning their income. On how efficient these machines will be. The increase of cost can easily be justified. However, business owners and homeowners.

Do not need to worry about what kind of phase that they are going to need. But it is important. That they talk to electrical contractors in Edmonton. About the different types of equipment that they are going to run. Or what they want to buy for their home in the future.

If they are getting contractors to come to their home. In order to upgrade their electrical systems. And now, that within a year. They are going to buy a hot to have for their house.

That is very important information. For the contractors to have initially. Who will then be able to run wires, for split phase power. So that when they get their hot tub. They do not need to call them to come back for an upgrade again.

As well, when they call electrical contractors in Edmonton. To upgrade the power in their commercial or industrial business. Showing them each one of the machines that they are going to operate.

Is going to help them understand. How to upgrade the power. To be as efficient as possible. When people are looking for the right electrician call. They should contact Hauer Power, regardless of if it is for commercial, industrial or residential.

Contact Us

14927 69 St NW, Edmonton, AB T5C 0J3